a bluetooth speaker Troubleshooting SoundBot SB510 HD Water Resistant Bluetooth Speaker

by:Winbridge      2019-12-16

Sound Robot SB510 high water-The Bluetooth speaker is a durable shower speaker but is very flexible and can be used in many different scenarios such as office, pool party, or in the kitchen at homeThe device is compatible with a variety of popular electronic devices with Bluetooth 3.0 function, even built-in suction cup on the back of the device.The speaker has a battery life of 6 hours and a health range of up to 40 feet.
However, some problems may be small-but-It has powerful speakers on its knees.These problems may be due to settings on the connected external device, trying to operate the device outside of the connection range, environmental factors, etc.

In order to turn the sound robot SB510 speaker on or off, you have to hold down the power button for about three seconds.Pressing the button quickly does not cause any operation.
If the device still refuses to turn on, try to connect it to AC power to charge it.The playback time on the Bluetooth speaker is about 6 hours, and the battery life will be fast if there are a lot of people using the device regularly.


After turning off the speaker, press and hold the power button for about six seconds.The lights on the device will start flashing red and blue.
Enable Bluetooth pairing on the media device to connect to the Bluetooth speaker.
Select "SB510" in the list of devices available for your connection and enter "0000" when prompted for a password ".
If you have paired your media device with a SoundBot speaker, make sure you are less than 40 feet away from the speaker.If you are further away, the device will not be able to communicate with each other.

This can be a tricky problem.The first and most obvious thing you want to do is make sure the volume is up on the Bluetooth speaker.If the volume is turned on the speaker, make sure that the volume is also turned on the connected media device.Most people don't take into account that the lower volume setting on the media device you connect will limit the sound on your voice robot shower speakers.
Another option you would like to try is to charge your speakers.When the battery is low, the first thing that starts to fade is the volume.

Accessing your phone through your SoundBot speakers can take a while to get used.To answer the phone on the speaker, please click on the "phone" icon at the bottom of the wheel.However, to access a personal assistant associated with the media player you connect to, such as SIRI on an Apple device, you have to press the "phone" button twice to access that particular feature.

Make sure the Bluetooth speaker is charged.
Clean the speakers and remove any dust and dirt.The build-Any dirt and debris over time will cause the buttons to not respond and eventually even the speakers will not work.
Surface protection internal electronic equipment for speakers.If any area on the speaker is cut or scratched, the water may enter the device, resulting in the device not working properly.
Try holding down the power button to force the device to turn off.Wait a few minutes and turn the device back on.What may be the reason for the speaker lock.Or, make sure the connected media player is working properly.This issue may not be a problem with the speaker, but with the connection of the media player.Try restarting the device to see if this solves the problem you are having.

Even if you have successfully paired your SoundBot SB510 speakers with a media player, there are many factors that make it difficult for both devices to communicate with each other.
Make sure there is no object between the Bluetooth speaker and the media player.Specifically, walls and cabinets are common sources of interference.
Try to turn off other electronics nearby.Baby monitors, video game systems, and other phones can send and receive signals, which can make it difficult for your device to communicate.
Make sure your media player is not connected to another Bluetooth device.
Custom message
Contact