best travel bluetooth speaker Troubleshooting Anker SoundCore Problems

by:Winbridge      2019-12-15

The Anker SoundCore series of Bluetooth speakers has a highly portable, impressive battery life and supports a powerful range of connectivity to other Bluetooth devices.Common issues with Anker SoundCore speakers include pairing issues, audio issues, power issues, etc.This guide will guide you on how to try to solve these problems yourself before contacting others for help.

The easiest way is to make sure that the Bluetooth feature is enabled on the device to connect to the Anker sound core speaker.If you are not sure how to find the Bluetooth settings, please refer to the device manual.By default, Bluetooth is turned off for most devices.
Try to get the two devices close to each other.They should be as close as possible for the purposes of pairing, but the distance between each other is not more than 3 feet.Also, make sure there are no devices between them that can prevent them from communicating.
Try to clear the previous Bluetooth pairing from Anker SoundCore's memory to see if this solves the problem.You can do this by pressing the volume down and volume up buttons for about three seconds.Try pairing the Bluetooth speaker with your device again to see if this solves the problem.

A considerable number of Bluetooth speakers provide a level of support for sending and receiving calls.However, Anker SoundCore does not provide the built-inIn the microphone, so when you can make a phone call through your phone and hear the audio through the speaker, you need to speak to your smartphone and let people on the other end hear your response.

The possible reason the power button is not working is that you have connected a device through 3.Audio input 5mm.It's not a problem, it's a design choice.You need to disconnect the device before turning off the Anker sound core Bluetooth speaker.

The sound core speaker may not be a problem, but the device connected to it.Un-Pair the two devices and try listening to the same audio file or audio source again to see if there is still a problem.
As long as there is a clear line of sight between the two devices, the sound core speaker and the connected device will be able to communicate up to about 30 feet.However, other than that, the connection issue may cause the audio that is played through the speaker to sound choppy.Try moving the device closer to see if it can solve the problem.
If the audio is always turned on Anker SoundCore speker and the sound is still low, check the connected device and verify that the audio is also turned on.You have to keep in mind that turning the volume down at any one place will affect the final audio output level.
Another reason for the poor audio or connection issues may be that the sound core speaker or the connected device is undercharged.If any of these devices indicate that the charging level is low, please charge them before resuming the use of these devices to see if this solves the problem.
Custom message
Contact