the best wireless microphone Router Vs. Layer 3 Switch

by:Winbridge      2019-09-06
Routers and third-tier switches have a set of overlapping features that create a lot of confusion when selecting between them.In this article we give a comparison which will make your work easier.It may be a difficult task to build a large computer network.
Gain insight into the capabilities of each network device to build an efficient network.The two components that are very similar at work are the router and the third layer switch.A router is a device that controls internal transmissionInternet and InternetNetwork data traffic.
These are smart microprocessor.
A controlled device that performs a decision to transfer data traffic to the correct address on the network.It connects multiple networks together and has various types depending on the size, complexity and number of networks it handles.It works with a configuration table containing a list of network addresses.
In network terms, it operates on the third layer of the OSI model.The router must check the packets entering the network and select the best path to transfer the data based on the status of the other packets on the network.Since it runs at the network layer, it uses the IP address of the connected machine to send packets to the correct destination.
Wireless router used on the network with built-inA firewall and wireless encryption mechanism designed to limit access to the network.These switches perform all the functions performed by the router, including directing packets to the correct destination.Network switches are often limited to the second layer of the OSI model to work, connecting the network segments together.
The third layer switch is the intersection between the router and the switch.This is a switch that works at level 3.These switches are fastThe switching hardware of the second layer switch has the logical routing function of the router.They inherited the essence of both devices, and mainly to achieve highAccelerate data transmission via LAN.
They are very different from the basic second layer network switches.The main difference between the router and this switch type is that the latter uses hardware to implement packet routing on the network.The third layer switch is implemented through software operation, and the third layer switch is implemented through hardware-level operation, which makes it run faster.
The switch hardware or forwarding architecture brings the high operating speed of the switch for the third layer of data transmission, which is the main difference between the two.The router is designed to run on a wide area network with WAN ports.Since the third tier switches run on the LAN, they do not have any WAN functionality.
The cost of these switches is only a fraction of the cost of the router.So if you need a routing device for your company's intranet, what you need is this type of switch.The third layer switch is basically a mix between the router and the switch, which contains the software logic and hardware of the former-The latter's level switching capability ultimately provides faster routing.
The router is implemented through software-level operation. this switch is realized through dynamic changes in hardware.Unlike the router, the third layer switch does not have a WAN port or any other WAN-Designed for related functions that run on a LAN.
Finally, when performing all the functions on the LAN at a higher speed, they cost much less than the router
Custom message