what's the best bluetooth speaker Car Audio Troubleshooting Tips

by:Winbridge      2019-09-22
The problem with the car sound system may annoy you with some music while driving.However, here are some tips for car audio trouble shooting for your reference when solving such problems.Imagine installing a new stereo system in your car, but it doesn't work properly.
Nowadays, the problem of car audio is very common. The reasons are various, such as loose wires, amplifier problems, or audio problems.These problems can also cause the speaker to burst or burst.
However, some steps can be taken to diagnose and fix these problems.The first thing you need to do is find the root of the problem.There may be many faults, such as cables, audio amplifiers, or speakers.
Make sure that all devices between the speaker, stereo and amplifier are properly connected.Disconnect the wire connecting the stereo and amplifier, but do not unplug the cable connecting the amplifier and the speaker.The amplifier may fail if the problem persists.
But if the problem is solved, just disconnect the wire from the radio.If the problem persists, the connection cable may need to be replaced.The stereo system will also not work if the connection is loose or lost.
Check all cables for stereo, amplifier and speakers separately and make sure they are connected properly.Cables that are torn, squeezed, or exposed may also be the reason why the system stops running.If the speakers don't have enough power, they don't make a sound.
The speakers installed by the car company work fine in the storeThe audio system is installed.If different speakers are installed, they may not work due to compatibility issues, or more power supply may be required to operate.Check their power supply using the meter.If they are accepting electricity but still not working properly, the power provided may not be enough.
The fuse may also be the reason why the stereo is not working.Please refer to the owner's manual to ensure all fuses in the fuse box are in good condition.If they are good, you need to check if the car's stereo system has its own fuse, which is possible in some cases.
If you find that the fuse is faulty, you need to replace it with a new fuse.There is also a possibility that the speaker will fail.You can check the horn with the meter.Ensure that there is no power supply for the speakers;Set the meter to display "Ohm ".
Place 1 m lead on each terminal point.
The meter will display 1 if the speaker is normal.0 Ohm, but if it blows, the meter will read the infinite Ohm.An easy way to check the blown speaker is to put your hand on it and if there is any vibration and bang you will feel the volume is loud.
If you don't feel the required heavy hits, the speaker will be blown.If the speakers are not installed in the right way, they may cause problems with hum or vibration.These problems can be solved by simply tightening the mounting screws a little.
You can also place a piece of rubber between the speaker frame and the interior of the car.If any of the above tips don't seem to work, you may need help from the car stereo technician
Custom message
Contact