wireless microphone system with speakers Connecting a Siren to a Wireless Home Security System

by:Winbridge      2019-12-26
wireless microphone system with speakers Connecting a Siren to a Wireless Home Security System
Wireless home security systems can monitor your entire home and prevent unwanted intruders, fires and even carbon monoxide.These wireless systems enable you to provide your home with the ability to withstand hazards without requiring hard connections to each area you wish to protect.You can even connect these devices to your phone line and make emergency calls to the authorities.Connecting the siren to a wireless security system can alert you to intruders or fires, and the noise from the siren can help the authorities find your location.Remove the screws that hold the lid on the wireless home security system alarm.Remove the cover and enter the mounting hole on the siren base.Some brands of siren hang on the screws on the wall.Wherever you install the siren, please make sure it is high enough to reduce the interference but still close enough to the power outlet such as some alarm operation at 120-Battery backup voltage.Mark the siren mounting hole on the wall.If the unit suspended on a single screw is installed, mark the position of the screw.Attach an 1/8-Drill bit to drill bit.Create a guide hole in the mounting hole position.Place the screwdriver into the opening end of the 8-threaded hollow wall anchor.Screw the anchor on the dry wall of the guide hole.If you are going to install the bolts on the wall, screw the wooden screws into the guide holes.Place the bottom of the wireless siren on the anchor or pilot hole.Screw the bracket to the wall.Install the battery in a wireless siren that requires a separate spare battery.Some sires were built-in 6-Volt battery that is charged when the battery is connected to the power supply.For those alarms that are not separated, wireless alarms are hung on the mounting screws.Plug the AC adapter into the opening on the wireless siren.Plug the adapter into the wall socket.Replace the covers on those unpacked units and fix the covers with the screws removed before installation.Program your wireless home security system to identify the siren.Place the Home Safety Control Panel in "learn" mode or "register siren" mode.Depending on the brand and model, this requires pressing the button on the panel until the device makes a beep, or scrolling the menu.There are some learning buttons on the siren.Press the learn button or the OK button and the control panel starts to recognize the siren.Press the home or add button, or the test button on the siren.The siren makes a sound alarm or scream, or a light flashes on the control panel indicating that your siren is connected to the control panel.This is a general description of siren identification;Your brand and model may be more complex or less than other wireless control panels, so please refer to your user manual for details about the system.
Custom message
Contact